Enjoy FREE Worldwide Shipping on Selected* Orders Over USD 799!

0

Your Cart is Empty

Electric Power Assisted Steering (EPAS - PLUG&DRIVE) - Land Rover SERIES 2/2A/3 - (SB300 + STEERING SHAFT COLUMN KIT)

Land Rover Series

Electric Power Assisted Steering

 Plug & Drive

EPAS SB300 + New Steering Column Set

For: 

Land Rover SERIES 2/2A/3

Free Shipping 

&

VAT/Duties included for selected countries*

 

- LHD Version - On stock and ready to ship

- RHD Version - Next Batch Available from 20/07/2026 - Book yours Today

 

Takes the legendary performance of our original EPAS - SB300 kit to the next level. 

Maximum convenience and compliance, this new version includes a pre-assembled new OEM-grade 34 CrMo steel bolt-in Upper steering Shaft Column and Steering Worm.

With Steering Columns Pre-Cut and Pre-modified for a perfect fit.

Just install and drive!  


- What’s Included on the Plug & Drive KIT?

           -  1x SB 300 12V system EPAS motor KIT. (24V under request)

           -  1x New Pre-modified Upper Steering Shaft Column.

           -  1x New Pre-modified Worm Steering Shaft Column.

           -  1x Column housing set.     

           -  1x All mounting hardware & connectors needed.

           -  1x Adaptation guide for existing SB300 kits

- Advantages from our SenorBarbo Standard EPAS - SB300?

           - Faster, and easier installation.

           - New column set ready to fit.

           - No modifications No Cutting, No Weldingon the existing Steering Column.

           - Compatible with your existing Steering Wheel.

           - All the performance, durability, and precision you expect.

  • Guaranteed Compliance
    - Crucial for countries where modifying (cutting/welding) original Steering Shaft columns is not allowed.
  • Increase your Vehicle’s Value
    - Keep the original column intact – ideal for purists or future resale. 
    - No need to hunt for a replacement steering shaft column.
    - Many classic Land Rover columns are worn, seized, or damaged. Our brand-new Plug & Drive column saves you the hassle (and cost!) of sourcing a rare original part or refurbishing and replacing your old one.

- Why do you need this System?

  • Full electric power assistance, drive your Land Rover Series with ease.
  • Better control over the vehicle at both slow and high speed.
  • Even better help you when you need it most: parking, low speed maneuvering and driving through difficult terrain.
  • Self-adjusted to your driving needs thanks to two torque sensors.
  • Operating parameters specially configured for Land Rover Series.
  • The electric motor uses power only when steering assistance is needed.
  • Completely maintenance free, eternal life span. 
  • The SB300 electric power steering works without making any noise.
  • In case electrical issues, the vehicle is NOT left without steering, instead it will continue to act as normal manual steering.
  • Only option in the market that does not require to fabricate parts to be adapted to your specific vehicle.
  • System designed based on motor assistance widely used in trucks and light agricultural vehicles.
  • The Kit is completely hidden under the dashboard, no visible once installed.
  • Re-use your existing Steering Wheel, shafts are compatible with your wheel.
  • Approximate installation time: 4–8+ hours. (This is an estimate based on installations performed by trained professionals on vehicles in good condition. Actual time may vary depending on experience and vehicle-specific factors.

- How to choose the correct KIT for my Land Rover Series?

  • Please make sure you select the right Upper Shaft for your Land Rover Series—choose your Series model (2, Early 2A) or (Later 2A, 3) and your steering side (LHD or RHD). This is essential to ensure proper fitment.

Identify your Upper Column type and choose the version required, based on the top of the column:

  • Threaded Upper End Shaft: Indicates a Series 3 or Series 2A Later Versions type (uses a top nut)
  • Smooth Flat Upper End Shaft: Indicates a Series 2 or Early Series 2A type (uses a side-bolt)

shafts labeled 'Series 3 Shaft' and 'Series 1&2 Shaft', with '34CrMo Steel' text on a white background.

Checking this is the most reliable method, as vehicles may have been modified from their original specification. 

  • The steering columns available are not compatible with early type of steering box for Land Rover Series 1 (80")(unless you had that early steering box replaced for one of a Series 2 or Series 3, in that case, it will be compatible). 
  • The steering columns available are not compatible Series 3A (Santana) models.
  • For those models, the original steering shaft column must be refurbished and used with our Standard SB300.

 

- How to install the EPAS - PLUG&DRIVE - KIT?

 DOWNLOAD - INSTRUCTION MANUAL

 DESCARGA - MANUAL DE INSTRUCCIONES

 

- Important Information

  • This product is normally on stock. If not, production lead time 2-4 weeks.
  • Pictures show actual products and are for illustration purposes only. Please note that design specifications may vary slightly, and we do not assume responsibility for minor design changes or sizes differences in appearance between the product you receive and the images shown.
  • Taxes and import duties are included in the product price for the EU*, UK, USA, Canada, and Australia. For other countries, please check with us.
  • The wheel lock system can not be used with the new columns
  • The steering wheel shown in the images is for display purposes only and is not included with the KIT.

 

 For further assistance, please do not hesitate to contact our team.

 

Stay connected